NewIntroducing the Vexum advisory boardRead the announcement
All posts · 4 min read

ISO 9001:2026: what it means for procedures and change control

The new edition asks more of how changes are planned, communicated and checked. Here is what changed for procedures, from published sources, and how to prepare.

VexumVexum
A checklist clipboard beside a padlock
In short
  • ISO 9001:2026 was published on 16 September 2026, and certification bodies describe a three-year transition, to about 15 September 2029.
  • The biggest shift for procedures is in planning of changes (clause 6.3): you now need to consider how a change is communicated, how its effectiveness is monitored and how its results are reviewed.
  • Organizational knowledge (7.1.6) must be retained, applied and shared, which puts what experienced operators know squarely in scope.
  • This summary is based on published sources. Confirm the requirements against your own copy of the standard and the dates with your certification body.

For most quality teams, ISO 9001:2026 is an evolution, not an overhaul. The structure is familiar. But several of the changes land directly on how procedures are kept current, which is the gap between what's written and what actually happens, seen from the auditor's side.

When was ISO 9001:2026 published, and when do we have to transition?

ISO 9001:2026, the sixth edition, was published on 16 September 2026 and replaces ISO 9001:2015. Certification bodies describe a three-year transition period from publication, ending around 15 September 2029, during which ISO 9001:2015 certificates remain valid. Some also note that new certifications to the 2015 edition stop earlier. Your certification body's dates are the ones that count.

What changed in planning of changes (clause 6.3)?

In the 2015 edition, clause 6.3 listed four things to consider when planning a change. Published summaries of the 2026 edition say the list grows to seven, adding how changes are communicated, how their effectiveness is monitored and evaluated, and how their results are reviewed.

In practice, a change is no longer finished when it is approved. You need to show that it reached the people affected and that it worked. For procedures, that means three questions for every change: who was told and retrained, how will we know the change worked, and when will we review it?

A change that was approved but never reached the floor doesn't close the gap. Clause 6.3 now asks you to show that it did.

What will an auditor ask about a change now?

Expect the questions to move past the approval signature. For a recent procedure change, an auditor might reasonably ask: Why was this change made, and what evidence supported it? Who was affected, and how were they told? How did you decide whether the change worked? When did you review the result, and what did you find?

A paper trail that ends at the approval can answer the first question. The other three need a record of what happened after the change went live: who was retrained on the new version, and whether the work on the floor actually followed it.

What changed in organizational knowledge (7.1.6)?

Summaries of the revision say knowledge must now be retained, applied and shared as far as necessary, and that the clause now relates to the intended results of the whole quality management system. For most plants, the knowledge that matters most lives with experienced operators and never made it into the procedure. Capturing it while they work, and bringing it into the procedure through an approved change, is the most direct way to show that knowledge is retained and shared.

What changed in documented information (7.5)?

The 2026 wording distinguishes information that must be available to support the work from documented information kept as evidence. Published guidance says existing documents and records don't need to be renamed. Clause 8.5.1 now refers explicitly to the availability and use of documented information when controlling production, so the current procedure should be available where the work happens. Published comparisons list clause 8.5.6, control of changes in production, as unchanged.

How should you prepare procedures and change control?

  • Map your change process to 6.3. Check that it covers communication, monitoring effectiveness and reviewing results, not just approval.
  • Decide how each change will be checked before it goes live: what result would show it worked?
  • Record how changes are communicated: who was told, when, and who was retrained on the new version.
  • Capture what experienced people know and bring it into the procedure through your approval route.
  • Make current procedures available at the point of use, with superseded versions clearly marked.
  • Agree the timing with your certification body. Transition audits are planned with them.

Vexum keeps a record of how procedures are run, changed and trained on, including who was retrained on each version and the runs that show whether a change held. That is evidence you can show an auditor, not proof of conformance. See management of change.

Sources

Frequently asked questions

When was ISO 9001:2026 published?

ISO 9001:2026, the sixth edition, was published on 16 September 2026 and replaces ISO 9001:2015.

When do certified organizations have to transition?

Certification bodies describe a three-year transition from publication, ending around 15 September 2029, during which ISO 9001:2015 certificates remain valid. Confirm the exact dates with your certification body.

Did control of changes in production (8.5.6) change?

Published comparisons list clause 8.5.6 as unchanged. The bigger changes for change control are in clause 6.3.

Does Vexum make us ISO 9001:2026 compliant?

No software does. Conformance is determined by your quality management system and assessed by your certification body. Vexum keeps a record of how procedures are run, changed and trained on, which is evidence you can show an auditor, not proof of conformance.

If you run procedures at a manufacturer and want to see where your written procedures and the real work differ, request a demo.

Get new posts by email

Product news and notes on procedures, change and training.